Security Alarms AR6000 Podręcznik Użytkownika Pobierz pdf (Strona 83)

83SPEKTRUM DX6 • DX6 HELICOPTER PROGRAMMING GUIDE

PROGRAMMABLE MIXING (A)

The DX6 in Helicopter mode offers one (1) programmable mix to be used for a number of different purposes. The

functions allow mixing any one channel to any other channel. The mix can remain on at all times or be switched

off in ﬂight using a number of different switches. Each channel is identiﬁed by channel numbers 1-6 (i.e., 2 =

aileron, 4 = rudder, etc. The channel appearing ﬁrst is known as the Master channel or the channel to which

you want to mix. The second channel is known as the Slave channel or the channel that is being mixed into

the Master channel. For example, 3-2 would indicate would indicate elevator-to-aileron mixing each time the

elevator stick is moved, the elevator will deﬂect, and the aileron will automatically move in the direction and to

the value input. Mixing is proportional, so small inputs of the master channel will produce small outputs of the

slave channel. Each programmable mix has a mixing “offset.” The purpose of the mixing offset is to redeﬁne the

neutral position of the slave channel. The elevator-aileron mix mentioned above is most commonly used to trim

the helicopter for proper loop tracking.







�







ACCESSING THE PROGRAMMABLE MIXING FUNCTION

1. Turn on the transmitter

2. Press the SCROLL and INCREASE buttons simultaneously to enter the Function mode.

3. Press the SCROLL button until “MIX A32” appears at the top right corner of the screen.

This is program mix A.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 95 96

Brak uwag

Security Alarms AR6000 Podręcznik Użytkownika Strona 83